document number: 93553 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 1 standard recovery diodes (hockey puk version), 1200 a sd800c..l series vishay high power products features ? wide current range ? high voltage ratings up to 4500 v ? high surge current capabilities ? diffused junction ? hockey puk version ? case style do-200ab (b-puk) ? lead (pb)-free typical applications ? converters ? power supplies ? machine tool controls ? high power drives ? medium traction applications electrical specifications product summary i f(av) 1200 a do-200ab (b-puk) rohs compliant major ratings and characteristics parameter test conditions sd800c..l units 24 to 36 40 to 45 i f(av) 1180 1065 a t hs 55 55 c i f(rms) 2280 2040 a t hs 25 25 c i fsm 50 hz 13 600 12 200 a 60 hz 14 240 12 800 i 2 t 50 hz 925 745 ka 2 s 60 hz 845 680 v rrm range 2400 to 3600 4000 to 4500 v t j - 40 to 150 - 40 to 150 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = t j maximum ma sd800c..l 24 2400 2500 50 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93553 2 revision: 14-may-08 sd800c..l series vishay high power products standard recovery diodes (hockey puk version), 1200 a note ? the table above shows the increment of thermal resistance r thj-hs when devices operate at diffe rent conduction angles than dc forward conduction parameter symbol test conditions sd800c..l units 24 to 36 40 to 45 maximum average forward current at heatsink temperature i f(av) 180 conduction, half sine wave double side (single side) cooled 1180 (550) 1065 (490) a 55 (85) 55 (85) c maximum rms forward current i f(rms) 25 c heatsink temperature double side cooled 2280 2040 a maximum peak, one-cycle forward, non-repetitive surge current i fsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 13 600 12 200 t = 8.3 ms 14 240 12 800 t = 10 ms 50 % v rrm reapplied 11 440 10 250 t = 8.3 ms 11 980 10 750 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 925 745 ka 2 s t = 8.3 ms 845 680 t = 10 ms 50 % v rrm reapplied 654 526 t = 8.3 ms 597 480 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 9250 7450 ka 2 s low level value of threshold voltage v f(to)1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.90 1.06 v high level value of threshold voltage v f(to)2 (i > x i f(av) ), t j = t j maximum 1.10 1.18 low level value of forward slope resistance r f1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.38 0.44 m high level value of forward slope resistance r f2 (i > x i f(av) ), t j = t j maximum 0.34 0.41 maximum forward voltage drop v fm i pk = 2000 a, t j = t j maximum, t p = 10 ms sinusoidal wave 1.66 1.95 v thermal and mechanical specifications parameter symbol test conditions values units maximum junction operating temperature range t j - 40 to 150 c maximum storage temperature range t stg - 55 to 200 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.073 k/w dc operation double side cooled 0.031 mounting force, 10 % 14 700 (1500) n (kg) approximate weight 255 g case style see dimensions - link at the end of datasheet do-200ab (b-puk) r thj-hs conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.009 0.009 0.006 0.006 t j = t j maximum k/w 120 0.011 0.011 0.011 0.011 90 0.014 0.014 0.015 0.015 60 0.020 0.020 0.021 0.021 30 0.036 0.036 0.036 0.036
document number: 93553 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 3 sd800c..l series standard recovery diodes (hockey puk version), 1200 a vishay high power products fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - current ratings characteristics fig. 6 - current ratings characteristics 30 40 50 60 70 80 90 100 110 120 130 140 150 0 100 200 300 400 500 600 700 800 900 30 60 90 120 180 avera ge forward curren t (a) maximum allowable heatsink temperature (c) conduction angle sd800c..l series (2400v to 3600v ) (single side cooled) r (dc) = 0.073 k/w thj-hs 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 600 800 1000 1200 1400 30 60 90 180 dc 120 average forward current (a) maxim um allowable heatsink tem perature (c) conduction period sd 800c ..l series (2400v to 3600v) ( s in g l e s id e c o o le d ) r ( d c ) = 0 .0 7 3 k/ w th j- hs 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 400 800 1200 1600 30 60 90 120 180 avera ge forwa rd curren t (a) maximum allowable heatsink temperature (c) conduction angle sd800c..l series (2400v to 3600v ) (double side cooled) r (d c) = 0.031 k/w th j-hs 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 400 800 1200 1600 30 60 90 120 180 avera ge forwa rd curren t (a) maximum allowable heatsink temperature (c) conduction angle sd800c..l series (2400v to 3600v ) (double side cooled) r (d c) = 0.031 k/w th j-hs 30 40 50 60 70 80 90 100 110 120 130 140 150 0 100 200 300 400 500 600 700 800 30 60 90 120 180 average forw ard current (a) maximum allowable heatsink temperature ( c) conduction angle (single side cooled ) r (d c ) = 0.073 k /w thj-h s sd800c..l series (4000v to 4500v ) 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 6 00 80 0 100 0 120 0 30 60 90 180 dc 120 average forward current (a) m axim um allow able he atsin k tem perature (c ) conduction period ( s in g l e s id e c o o le d ) r (d c ) = 0.073 k/w thj-h s sd 800c ..l se rie s (4 000v to 4500v )
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93553 4 revision: 14-may-08 sd800c..l series vishay high power products standard recovery diodes (hockey puk version), 1200 a fig. 7 - current ratings characteristics fig. 8 - current ratings characteristics fig. 9 - forward power loss characteristics fig. 10 - forward power loss characteristics fig. 11 - forward power loss characteristics fig. 12 - forward power loss characteristics 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 600 800 1000 1200 1400 30 60 90 120 180 averag e forw ard curren t (a) maximum allowable heatsink temperature (c) con duction angle (double side cooled) r (d c ) = 0 .03 1 k /w thj-h s sd800c..l series (4000v to 4500v ) 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 40 0 80 0 120 0 1 600 2 000 2 400 30 60 90 180 dc 120 average forw ard current (a) maximum allowable heatsink temperature (c) conduction period (d ouble side c ooled ) r ( d c) = 0.0 31 k/w thj-hs sd 80 0c ..l se rie s (4000v to 4500v ) 0 500 1000 1500 2000 2500 3000 3500 0 200 400 600 800 1000 1200 1400 1600 180 120 90 60 30 rms limit conduction angle m aximum average forward power loss ( w) average forw ard current (a) sd800c..l series (2400v to 3600v ) t = 150c j 0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 500 1000 1500 2000 2500 dc 180 120 90 60 30 rms limit conduction period maximum average forw ard power loss (w) average forward current (a) sd800c..l series (2400v to 3600v) t = 150c j 0 500 1000 1500 2000 2500 3000 3500 0 200 400 600 800 1000 1200 1400 180 120 90 60 30 rms limit conduction angle maximum average forward power loss (w) average forw ard current (a) sd800c..l series (4000v to 4500v ) t = 150c j 0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 400 800 1200160020002400 dc 180 120 90 60 30 rms limit conduction period maximum average forward pow er loss (w) average forward current (a) sd8 00c ..l ser ies (4000v to 4500v ) t = 150c j
document number: 93553 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 5 sd800c..l series standard recovery diodes (hockey puk version), 1200 a vishay high power products fig. 13 - maximum non-repetitive surge current single and double side cooled fig. 14 - maximum non-repetitive surge current single and double side cooled fig. 15 - maximum non-repetitive surge current single and double side cooled fig. 16 - maximum non-repetitive surge current single and double side cooled fig. 17 - forward voltage drop characteristics fig. 18 - forward voltage drop characteristics 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000 0 0 1 0 1 1 number of equal am plitude half cycle current pulses (n) peak half sine w ave forw ard current (a) in it ia l t = 1 5 0 c @ 60 hz 0 .0083 s @ 50 hz 0 .0100 s j sd 8 00c ..l se rie s (2400v to 3600v ) at an y rated load c ondition an d w ith 50% rated v applied following surge rrm 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000 15000 1 1 . 0 1 0 . 0 pulse train duration (s) pea k half sine wave forward curren t (a) maximum non repetitive surge current sd800c..l series (2400v to 3600v) 50% rated v reapplied no voltage reapplied in it ia l t = 15 0 c rr m j versus pulse train duration. 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 0 0 1 0 1 1 number of equa l am plitud e h alf cycle current p uls es (n) peak half sine wave forward current (a) initial t = 150c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j at any rated load condition and with 50% rat e d v a p p lie d fo llo w in g s urg e rr m sd800c..l series (4000v to 4500v ) 2000 4000 6000 8000 10000 12000 14000 0.01 0.1 1 pulse train duration (s) p e ak h a lf sine w a ve f orw a rd c urrent (a) m a xim um no n rep e titiv e surg e c urre nt ve rsus p ulse t ra in d ura tio n. initia l t = 15 0 c n o v o lt a g e r e a p p lie d 50 % rate d v re applied rrm j sd 8 00c ..l se rie s (4000v to 4500v ) 100 1000 10000 0.5 1 1.5 2 2. 5 3 3.5 4 4.5 t = 25c j instantaneous forward voltage (v) instantaneous forward current (a) t = 150c j sd800c..l series (2400v to 3600v) 100 100 0 10000 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 t = 25 c j instantaneous forward voltage (v) instantaneous forward current (a) t = 150c j sd 8 00c ..l se rie s (4000v to 4500v )
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93553 6 revision: 14-may-08 sd800c..l series vishay high power products standard recovery diodes (hockey puk version), 1200 a fig. 19 - thermal impedance z thj-hs characteristics ordering information table 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 sq uare w a ve p ulse d ura tion (s) thj-hs t ransie nt the rm al im pedanc e z (k/w ) stea d y sta te va lue r = 0.073 k/w (single side c oo led) r = 0.031 k/w (d ouble side c ooled) (d c operation) thj-hs thj-hs sd 800c ..l series 1 - diode 2 - essential part number 3 - 0 = standard recovery 4 - c = ceramic puk 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 - l = puk case do-200ab (b-puk) device code 5 13 24 6 sd 80 0 c 45 l links to related documents dimensions http://www.vishay.com/doc?95246
document number: 95246 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 05-nov-07 1 do-200ab (b-puk) outline dimensions vishay semiconductors dimensions in millimeters (inches) 58.5 (2.30) dia. max. 53 (2.09) dia. max. quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specifications) 3.5 (0.14) dia. nom. x 1.8 (0.07) deep min. both ends 0.8 (0.03) both ends 34 (1.34) dia. max. 2 places 26.9 (1.06) 25.4 (1)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
